Pump System Speeds Epoxy Wear-Backing Replacement



ME Elecmetal now offers an automated epoxy backing pump to assist in the replacement of wear components in crushing equipment. Mounted to a frame allowing the use of large volume epoxy containers, it is capable of pumping up to 3 gpm. The pump utilizes disposable applicator tips that mix the two-part epoxy, eliminating the need for repetitive hand mixing of smaller containers. The applicator/mixing tips also minimize the exposure to fumes that may develop from the mixing process. The unit includes a self-contained heater to facilitate quicker pumping and curing of the epoxy, and is accessible by fork lift from all sides. It has certified lifting rings to allow for overhead crane movement and is optionally available as a trailer-mounted unit for relocation to various crusher sites.

www.me-elecmetal.com


As featured in Womp 09 Vol 04 - www.womp-int.com